Over time, it’s not unusual for residential sidewalks to develop a few cracks or crumbles. To keep this damage from spreading too quickly, and to prevent potentially unsafe conditions, you’ll want to repair these problems before they get too big. This project guide offers steps and instructions on how you can repair those small cracks and crumbles yourself using just a few common masonry tools and a little bit of time.

Drywall repair is a project that most homeowners will have to face at one time or another. It encompasses a wide range of problems that include everything from nail pops to holes from doorknobs to major repairs like water damage and cracks caused by a settling foundation. Whatever your problem is, it’s important to understand the scope of the repair so that you don’t get in over your head if you’re a do-it-yourselfer.

A sheet of drywall, while relatively strong, only consists of a layer of gypsum plaster between two thick sheets of paper. It’s then kiln-dried to ensure rigidity. This basic construction allows the drywall to be both inexpensive and easy to use. On the downside; it is also easily damaged.

In most homes, there are usually one or two nicks, dings or holes in the walls that need attention. If the damage doesn’t extend all the way through the drywall, then the fix is simple. Just remove any loose plaster or paper around the edge and apply some drywall spackle. Wait for it to dry, sand the area and apply another coat if needed. Sand it again when dry and that will do it. 

Roof repair can be need at any time. A wind storm or a fallen tree limb are just some of the reasons for an emergency roof repair. If you don’t do a roof leak repair quickly, an entire section of your drywall ceiling can fall.