|
|
 |
||
|
|
||
0
Applying semi transparent deck stain is an ideal way to add color to your patio as well as protect it. Being aware of the various tips and hints that can be followed during the process of applying the stain will ensure that you achieve a decent result.
Tip #1 – Preparation
In order to ensure that the stain takes properly, it will be necessary to prepare the surface in readiness of accepting the solution. In addition to sweeping up any dirt and debris that may be present on the deck, take some time to give it a more thorough cleaning. If you do not have a pressure washer, a scrubbing brush will be sufficient. Pay particular attention to any marks on the surface as this can result in voids in the stain if they are not taken care of. If any stains have seeped into the wood of the deck, rectify this by gently resurfacing the affected sections with sandpaper. Ensure that you wipe away any resultant dust after this process before beginning to apply any stain.
General FAQ’s
Why does wood need to be protected with preservatives?
How long will treated wood last?
How much weight does treatment add to the weight of wood?
Why is treated wood green?
Why can’t I burn my wood scraps?
What should I use to apply to the cut ends of my boards?
Can I use treated wood inside?
Where can I learn more about the safety and environmental aspects of CCA treated wood?
Installation & Maintenance FAQ’s
What type nails or screws do you recommend?
How long do I need to wait before I paint, stain, etc. my deck?
What do you recommend I use to paint, stain, etc. my deck?
Someone told me not to use concrete to set my posts – that it would void the warranty.
How do I remove the grade stamp from my deck?
What do you recommend I use to clean my deck?
Wood Preservative FAQ’s
What preservatives are used to treat pressure-treated wood?
What is CCA?
What is ACQ?
What treatment and retention level should I use for above-ground applications?
What treatment and retention level should I use for ground-contact applications?
What treatment and retention level should I use for freshwater contact?
Pressure-treated wood is used for building and gardening. It is often seen in play sets and decks and is used to build raised garden beds. It contains chromium, copper and arsenic (CCA). Pressure-treated wood can release these toxic chemicals so care should be taken to ensure the wood is disposed of safely.
Back to top